How to Fix a Blue Screen of Death Error in Windows 10

There are a few options for dealing with Windows 10’s most notable system problem. With a market share of 77.3 percent as of October 2020, Windows 10 has surpassed the 9-year-old and extensively used Windows 7 as the most popular desktop operating system. Windows 10 isn’t without flaws, despite its growing popularity. Windows also throw a halt error known as the “blue screen of death,” similar to kernel panics in macOS and Linux and bug checks in OpenVMS. In most circumstances, this stop error prohibits you from progressing past the error screen, preventing you from carrying out your routine tasks. Let us check out how to fix a Blue Screen of Death Error in Windows 10 in this blog.

What is the meaning of the BSOD “Blue screen of death”?

A blue screen of death (BSoD) indicates that Windows 10 has discovered a fatal system fault and must shut down promptly to prevent the operating system from being damaged. Following this procedure, you will be presented with a blue screen with a sad emoji and a mysterious notice that reads, “Your computer has encountered a problem and has to be restarted. We’re just gathering some error data before restarting for you.”

Windows 10 also displays a generic problem code in addition to this message. Although the code does not provide information on the source or a potential solution, it does assist you in gaining a high-level understanding of the problem.

Microsoft has acknowledged and listed hundreds of stop error codes to date, ranging from the benign VIDEO_TDR_TIMEOUT_DETECTED to the dire CRITICAL_PROCESS_DIED.

Here are some of the most common stop error codes:

• SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
• IRQL_NOT_LESS_OR_EQUALv
• PAGE_FAULT_IN_NONPAGED_AREA
• SYSTEM_SERVICE_EXCEPTION
• BAD_SYSTEM_CONFIG_INFO

Users may also encounter a hexadecimal format of the stop fault in addition to the general code. The code parameters can provide additional details about the problem to a trained eye, which they can utilize to study a fix. On the other hand, the hexadecimal code might be difficult to understand and of little use to non-IT specialists and simple users.

What is the reason behind the blue screen of death?

A blue screen error can be caused by a variety of software and hardware faults, including:

• There isn’t enough space on the system disc.
• Device drivers that aren’t working
• Misconfigured BIOS
• Corruption of the hard drive
• Windows 10 issue that has yet to be identified
• Windows XP is an old operating system.
• Incorrect registry entries in the system

[INSERT_ELEMENTOR id=”13371″]

Typically, blue screen failures occur following an upgrade, after installing an app or updating a driver. However, it’s not uncommon to run into this problem while using the program regularly.

How do I Fix a Blue Screen Error? Troubleshooting Guide for BSOD Error

The first step in resolving a Windows 10 stop issue is to see if you have access to the desktop or if you’ve been locked out.

Using desktop access to fix the blue screen of death

If you get a blue screen error but can still access your desktop, the issue is most likely caused by a recently installed software, an old driver, or a Windows 10 update.

Here are several options for resolving the blue screen of death problem.

Make sure you have the most recent updates and drivers.

Check for and install the newest Windows using the following steps: 

• Select “Settings” from the Start menu.
• Select “Update & Security” from the drop-down menu.
• “Windows Update” will appear.
• Check for updates by clicking “Check for updates.”
• If necessary, follow all instructions to install the most recent Windows update.

Follow these instructions to update the drivers on Windows 10:

1. In the Windows 10 search bar, type “Device Manager.”
2. Select “Device Manager” from the drop-down menu.
3. To broaden the device category that you think is causing the issue, click it.
4. Select the suspected defective device with the right-click menu.
5. “Update driver” should be selected.
6. Select “Automatically search for updated driver software.”

If this doesn’t work, go to your device manufacturer’s website and download and install a newer driver version.

Updates, drivers, and third-party software that are incompatible should be removed.

Faulty drivers and Windows 10 updates can also cause the blue screen of death. Stop errors will be resolved, as well as potential malware vulnerabilities repaired by uninstalling these problematic updates.

Remove any recently installed updates by following these steps:

1. Go to the Control Panel and click on it.
2. Under the “Programs” heading, click “Uninstall a programme.”
3. In the left pane, select “Installed updates.”
4. To erase the most current update, choose it and then click “Uninstall” above.
5. If the error occurs after installing a certain driver, use these procedures to fix it:
6. In the Windows 10 search bar, type “Device Manager” and click “Device Manager.”
7. To extend the category of the problematic equipment, click it.
8. Click “Uninstall device” from the context menu of the problematic device. You may also go back to the old driver by right-clicking on the device and selecting “Properties.” Open the “Driver” tab in the Properties box, click the “Roll Back Driver” button, and then click “OK” to confirm.

This is the most common cause of the blue screen of death after installing an app. Use the methods below to uninstall the offending app:

• Select Start from the Start menu.
• “Select Settings.”
• Select “Apps.”
• Locate the app that is in dispute with the others in the list and select it.
• Select “Uninstall.”
• To finish the uninstallation, follow the on-screen instructions.

Unplug any peripherals that aren’t compatible.

If the connected hardware isn’t compatible with Windows 10, the blue screen of death will appear. To see if your hardware is compatible with Windows 10, go to the manufacturer’s support page.

If it’s incompatible, unplug it and replace it with something compatible.

Read also: Windows 11 Features, Specifications

How to Fix Blue Screen of Death Error in Windows 10? | [Video Guide BSOD Fix 2021]

How to Fix the Blue Screen of Death if you don’t have access to a Computer.

You can utilize System Restore and Safe Mode as solutions if you can’t access the desktop.

Here’s how to go about it.

Using System Restore, you can undo any changes you’ve made.

System Restore restores the previous state of the system software. To get to System Restore, you’ll need to go into advanced starting settings.

Follow these procedures to access and activate System Restore:

1. To access the advanced starting options, turn on your computer and press and hold the power button to halt the boot process.
2. Step 1 should be repeated two more times. Windows 10 will open in the advanced starting environment and provide troubleshooting options after the third off-on power cycle.
3. Select “Advanced options” from the drop-down menu.
4. Select “System Restore” from the drop-down menu.
5. Choose the restore point that was made just before the blue screen displayed. When Windows 10 downloads an update, driver, or software, it normally creates a system restore point.
6. Click the “Close” button.
7. “Next” should be selected.
8. Select “Finish” from the drop-down menu.

System Restore will now erase all updates, drivers, programs, and modifications you made after the restore point to fix the blue screen error.

In Safe Mode, uninstall device drivers or Windows 10 upgrades.

Another option for dealing with the blue screen of death is to start Windows in Safe Mode. Safe Mode can be accessed using the advanced startup options, just like System Restore.

Start Windows 10 in Safe Mode and follow the procedures below to resolve the blue screen of death:

1. To access the advanced starting options, turn on your computer and press and hold the power button to halt the boot process.
2. Step 1 should be repeated two more times. Windows 10 will open in the advanced starting environment and provide troubleshooting options after the third off-on power cycle.
3. Click “Restart” after selecting “Startup Settings.”
4. When the reboot starts, press “F4” or “4” to pick the “Enable Safe Mode” option.
5. While in Safe Mode, uninstall any Windows 10 updates or device drivers.

Blue screen of death errors is difficult but not impossible to overcome.

While stop errors might be frustrating, Microsoft has solutions for practically every form of issue that results in a blue screen of death. Other important steps you can take to minimize the impact of an unexpected, unplanned downtime caused by a blue screen issue include scanning for viruses and backing up your data.

Quick links: Norton.com/Setup | McAfee.com/activate | Norton Refund | Microsoft Office 365 Refund | Norton VPN not Working | Norton Error 8504 | McAfee activate 25 digit code

[INSERT_ELEMENTOR id=”11874″]